How to inflate a pool with a vacuum? – Do you not own an air compressor that can be used to inflate pool toys or air mattresses? You don’t need anything else if you have a vacuum or a shop vacuum.
Table of Contents
Why do we need to inflate a pool with a vacuum?
On scorching summer days, the cool comfort of an inflatable swimming pool is a welcome relief, but there is no need to worry about the continuous maintenance concerns that come with a permanent pool.
A device that contains a compressor and the ability to direct the flow of air into the pool sides is required in order to successfully inflate an inflatable swimming pool. As the compressor device, you can make use of a regular household vacuum cleaner.
There is no requirement for any specialized tools or equipment; only some common household implements and supplies are required. The upright vacuum cleaner won’t have any of its physical properties changed or damaged in any way.
How to inflate a pool with a vacuum?
Step 1: Get the pool ready to be inflated
After it has been inflated, place the inflatable swimming pool where there will be enough space for it in your backyard. You should take your vacuum outside. The front cover should be removed and set aside after pressing a button or tab, if necessary. On the inside of the vacuum cleaner, twist the suction bag off the nozzle. Place the bag in the trash after use. Reinstall the cover.
Step 2: Connect the vacuum cleaner to an outlet
In order to remove the flexible hose from the vacuum cleaner’s back, you might need to first press a button or tab. Connect the power plug for the vacuum cleaner to an extension cord with an outside rating. If there isn’t an AC outlet outside the house, plug the outdoor-rated extension cord into an outlet within the building.
Step 3: Test the vacuum cleaner, a shop vac
Point the hose’s end away from you. To make sure that air is being blasted via the hose, turn on the vacuum cleaner. Shut off the vacuum sweeper.
Step 4: Place the hose into a plastic bottle
Put the hose’s tip against the base of a water bottle made of plastic. With a pencil, trace a circle around the hose on the bottom. Use the utility knife’s blade to cut out the outline. Put the plastic that has been cut into the garbage. Fill the bottle’s bottom hole with the hose’s open end. To prevent the hose from falling out of the opening, wrap it using duct tape strips.
Step 5: Start pumping air into the pool
Take off the cap from the end of the inflatable pool’s nipple on the side. Put the bottle’s open mouth up against your nipple. Activate the vacuum cleaner. Holding the bottle’s mouth against the nipple with one hand while applying pressure to its sides with the other. When the pool is fully inflated, take the bottle out of the nipple. Shut off the vacuum sweeper. Reapply the cap to the nipple.
Step 6: Turn off the vacuum and clean up.
Remove the extension cord from the vacuum cleaner. Reinstall the front cover of the vacuum and insert a fresh vacuum bag. From the hose, remove the bottle. Put the vacuum cleaner’s hose back in its usual location.
How to Reverse A Vacuum Cleaner To Inflate
One indication that you have an issue is having a sizable blow-up pool float but not having access to an air compressor or leaf blower. You can’t blow it up with your lungs or a foot pump. Good news! You may adapt specific vacuum cleaner models to your needs.
Step 1
On an upright vacuum, identify the bag attachment point by looking inside the vacuum bag compartment. Some upright vacuums have plastic fittings to which the bags can be attached. Other variants have a switch to change the direction of airflow.
Step 2
Remove the vacuum bag and cut the flexible hose from the suction. If your model has a hose, connect the vacuum with the flexible hose.
Step 3
Use the vacuum outside, on the patio or driveway, or keep it in the garage. Plug in your vacuum, point it away from you, and turn it on to remove dust, hair, and grime. For a few minutes, run the vacuum to give it a thorough cleaning.
Step 4
Cut pieces of duct tape to fit the hose to the opening where you removed the vacuum cleaner bag. In order to stop any air leakage, make sure the tape is properly sealed. A wet/dry vacuum’s exhaust fitting can be taped directly to the hose to create a secure connection.
Step 5
Cut the plastic bottle’s bottom off with the utility knife. Afterward, take off the plastic top. Attach the water bottle to the vacuum hose with duct tape. Make sure to properly seal it. Numerous raft nozzles can be fitted using an adaptor made of plastic bottlenecks.
Step 6
To attach the bottle top to the object you intend to inflate, you might need to cut extra pieces of duct tape. Seals must be as airtight as possible while also being simple to release.
Conclusion
It is no longer necessary to use an air compressor in order to inflate your inflatable pool because you can now use a standard vacuum cleaner to do so with the assistance of a few common home appliances and without the need for any specialized equipment. We really hope that by the time you’ve finished reading this tutorial at bestvacuumcleaning.com, you’ve picked up some new techniques for blowing up your inflatable swimming pool.
