How to empty Wyze vacuum – Cleaning a Wyze robot vacuum on a regular basis will lengthen its lifespan significantly. Not only does it require that its dustbin be emptied on a regular basis, but you also have to clean the components of the device in order to keep it functioning like a well-oiled machine.
Table of Contents
How to Empty Wyze Vacuum?
The area where the debris that your Wyze robot vacuum vacuums up is called the dustbin. The dustbin merely needs to be dumped into the garbage and then reinstalled in the robot vacuum, unlike the filter and brushes.
Generally speaking, the following steps can be used to clean a Wyze Robot Vacuum’s dustbin:
- Remove the trash can from its holder. Open the book’s cover.
- Hold the garbage container over the dustbin.
- Remove everything from the trash can.
- Dust can be removed with the brush.
- Reposition the dustbin inside the vacuum and then close the lid.
You have a variety of options for maintaining the functionality of your gadget. Continue reading to find out more about the robotic vacuum maintenance you need to perform.
How to Clean Wyze Robot Vacuum?
Make sure you have a trash can nearby, a soft cleaning cloth (ideally microfiber), and, if you have one, a portable vacuum cleaner, before we begin.
Here are the 8 steps to cleaning a Wyze robotic vacuum:
1. Clean the top cover
Start by wiping the top of the Wyze robot vacuum’s lid with the cleaning cloth. To prevent scratching a glossy sheen, we advise using a soft cleaning cloth, such as microfiber.
2. Get the cleaning equipment
Next, remove the cleaning instrument by opening the lid (located beneath the top cover). The cleaning tool is required to trim any hair that might be tangled around the main brush and to clean the HEPA filter.
3. Take out the trash
Pull the trash can out of the Wyze robot vacuum’s body to remove it. To empty its contents, grab the lid firmly and open it while holding it over a garbage bin. The dustbin housing should be cleaned of any leftover debris using a handheld vacuum or a clean cloth. Don’t install the trash can just yet because we still need to clean the filter after finishing.
4. Scrub the dustbin and the filter
After removing the filter from the trash can, clean the filter with the cleaning tool using a clean brush. We suggest doing this while holding the filter over a garbage can to prevent more mess.
If the filter is still dirty after using the brush, give it a gentle rinse under running water. Do this exercise over a sink. Before reinstalling the filter, please make sure it is completely dry. Use the brush that included with the cleaning equipment to remove any remaining dust from the trash can. Don’t forget to thoroughly clean the mesh that separates the trashcan from the filter.
Once everything has been thoroughly cleaned and dried, place the filter back into the dustbin before carefully reinstalling the dustbin into the Wyze robot vacuum. The interior of the robot vacuum is now clean.
5. Scrub the sidebrush
To remove the side brush, turn the Wyze robot vacuum over first. To get rid of any debris or tangled hair that might get caught in the side brush’s threads, use your hands.
6. Wash the primary brush
Now let’s clean the main brush. To release the primary brush cover, push on the two blue tabs. Before removing the main brush from the device, clear it of any hair, threads, or debris that may be tangled around it.
To cut through any tricky knots, use the cutters on the accompanying Wyze cleaning tool. However, any tangles you encounter should be easy to remove with your hands.
The connections at the brush’s end sides are difficult to remove. You’ll need to be inventive and think outside the box to untangle the tangled hair. Untangle a paperclip and use it as a thin object.
After thoroughly cleaning the brush compartment with a handheld vacuum or a clean cloth, reinstall the brush cover and main brush. Once you’ve given it a quick wipe, you’re good to go.
7. Polish your front wheel
Most people aren’t aware of how much thread, grime, and hair can accumulate underneath the front wheel. To remove it from the main device, you’ll need to pry it loose using a tiny screwdriver.
After removing the front wheel, you should clean the front wheel and its compartment of any hair, threads, or dirt you may have found. When you’re done, just put the front wheel back on.
8. Sensor cleaning
A clean towel still has to be used to clean the front cliff sensors. Give it a thorough cleaning. If the sensors have a layer of persistent film on them, use something stronger, like alcohol wipes.
How To Clean The HEPA Filter Of A WYZE Robot Vacuum?
Cleaning a Wyze Robotic Vacuum’s filter entails:
- Remove the trash can and the cleaning tool.
- Take the filter off.
- Dust it off, then give it a gentle water rinse.
- Replacing the filter
- Replacing the cleaning brush and dustbin in the robot vacuum.
- Snap the top cover shut.
The dustbin’s back can be removed from either side in order to access the HEPA filter. Never forget to remove the vacuum’s filter and let it air dry. Rinse the filter with only water; do not use soap or other detergents as they could damage it.
If the robotic vacuum cleaner in your home includes a HEPA filter, you are secure. HEPA stands for High-Efficiency Particulate Absorbing. These air filters are designed for environments where strict pollution control is required. These filters could purge the air in your house of germs, viruses, and allergens. To keep your family safe, bear in mind to regularly clean the HEPA filter.
How Do You Remove The Brush From A WYZE Vacuum?
In a Wyze robot vacuum, remove and clean the brush as follows:
- Take off the top cover.
- Take away the little cleaning brush.
- By pushing the two blue tabs inward, the brush cover can be released.
- Clean it by removing it from its slot.
- Reposition each brush.
Be sure to unplug your device from the charging station before removing the brush from it. The cleaning tool has a hook on one end so you can easily remove knotted hair.
For the first few times, it could be more difficult than you anticipate to open the vacuum’s top cover. Always lift the lid from the side opposite the power button.
Consult the user manual that came with your Wyze Robot Vacuum if some of these procedures did not help you in your experience.
FAQ on Cleaning Wyze Robot Vacuum
The most typical queries concerning cleaning a Wyze robot vacuum are listed here. Please feel free to bookmark this page as we will continue to update it with fresh questions and answers.
How Often Should Robotic Vacuums Be Emptied?
According to how much trash they take up and what the manufacturer advises, users should generally empty vacuum dustbins every three to four cycles, or every 2-4 days. Self-emptying robot vacuums are also available; they automatically empty themselves after filling up.
Your robot vacuum cleaner’s filter needs to be cleaned every time the dustbin is emptied. The device retains its maximal suction force for a considerable amount of time in this way. It’s also a good idea to change the filter twice or three times a year to ensure that your home is always receiving the best possible protection from air toxins.
Can I use the WYZE vacuum on carpets?
Wyze robot vacuums can handle carpet that is up to an inch thick. Tassels, shag pile rugs, and other carpets with long woven strings should not be used with the device because they can clog the brush.
Your Wyze robot can even take into consideration ‘bumps’ on a surface that are up to 20 mm high. Hard surfaces provide the best performance. If your home has thick carpeting, make careful to create virtual walls for the robot.
Wrap up
You should now be familiar with the process of how to empty Wyze vacuum and clean it. If you are familiar with the appropriate procedure, cleaning and maintaining a Wyze robot vacuum is as easy as taking a stroll in the park using the cleaning equipment that comes with the device. Thank you for reading at bestvacuumcleaning.com
